Air-Z Flex
제어 전자 장치 및 압력 센서가 있거나 없는 자동 공기 변위 피펫팅 모듈 사용 가능.
Air-Z Legacy
액체 취급 로봇 시스템에 사용하기 위한 입증된 기술을 갖춘 TriContinent의 첫 번째 공기 변위 피펫입니다.
Air-Z Premier
팁 배출이 통합되고 액체 레벨, 팁, 팁 막힘, 스텝 손실 등을 자동으로 감지하는 완전한 기능을 갖춘 완전히 프로그래밍 가능한 공기 변위 피펫팅 모듈입니다.
Air-Z FEATURES | Air-Z Premier | Air-Z Flex | Air-Z Legacy |
|---|---|---|---|
High-resolution encoder (step loss detection) | ✓ | ✗ | ✗ |
Liquid level detection: pressure (pLLD) | ✓ | ✗ | ✗ |
Liquid level detection: capative & hybrid (cLLD & hLLD) | ✓ | ✗ | ✗ |
Real time streaming pressure data | ✓ | ✓ | ✗ |
Quiet at all speeds | ✓ | ✓ | ✓ |
Built-in tip ejector | ✓ | ✗ | ✗ |
Clogged tip detection | ✓ | Option | ✗ |
Fully programmable (w/control electronics) | ✓ | Option | ✗ |
Optional horizontal or vertical mounting orientation | ✗ | ✓ | ✗ |
Pump volume options | 1000 μL | 250 μL, 1000 μL | 20 μL, 1000 μL, 2000 μL, 5000 μL |
Tip volume availability | 20 μL, 50 μL, 200 μL, 1000 μL | 20 μL, 50 μL, 200 μL, 1000 μL | 20 μL, 1000 μL, 2000 μL, 5000 μL |
Overall dimensions without disposable tip (H x W x D) | 168.7 mm x 60.5 mm x 30.5 mm | 121.1 mm x 30.6 mm x 25.0 mm | 131 mm x 47 mm |
Drive Design | Stepper motor driven linear actuator with high resolution encoder for step loss detection |
Dispense Speed | Pump volume 1000 μL: 1 μL/second up to 1800 ul/secondPump volume 250 μL: 1 μL/ second up to 450 μL/second |
Volume Resolution | Pump volume 1000 μL: 0.301 μL/half step increment with 3700 increments/full strokePump volume 250 μL: 0.075 μL/half step increment with 3500 increments/full stroke |
Communication Interfaces | RS485, or CAN |
Addressing | Maximum of 15 pumps individually |
Operating Noise | <60 dBA, Indoor use only |
Operating Temperature Operating Humidity | 15°C to 40°C (59°F to 104°F)20 to 95% RH at 40°C (104°F) |
Non-Operating Temperature Non-Operating Humidity | -20°C to 65°C (-4°F to 149°F)30% to 85% RH non-condensing |
Media Temperature | 15°C to 40°C (59°F to 104°F) |
Overall Dimensions (H x W x D)(with full electronics with tip adapter and without disposable tip) | Vertical H121.mm x W 21.0 mm x D 31.8 mm Horizontal H 21.0 mm x W 121.1 mm x D 31.8MM |
Weight | 100 gm |
Fluid Contact Materials (in case of accidental fluid aspiration) | 1000 μL & 250 μL—Acetal, PTFE, Silicone lubricant, Silicone, PPS, Neoprene, Borosilicate glass, Viton and Stainless steel |
전자식 완전 제어 기능*
Imprecision (full volume) in 50 μL, 200 µL, 100 µL Tips | <0.75% CV |
Inaccuracy (full volume) | <1% Tip volume |
Imprecision | <1% CV |
Inaccuracy | <2% |
Power Requirement | 24VDC, 500 mA |
Power Rating | <500 mA (peak) |
*Specifications were determined gravimetrically using a precision balance, an automated robotic handling system withoptimized pump protocol, and tightly controlled environmental conditions; test temperature 23C ±2C, relative humidity35% ±5%, pump and test liquid (distilled water) temperature ≤ ±1 C of room temperature. Results may vary in otherenvironmental conditions, with other liquids, with disposable tips used, and depending on pump handling methods. |
|
*Parameters without full electronics dependent on customer use
문의하기